Date:24/10/2017
Radial Drill Manufacturer, Pillar Drill Exporter, Industrial Drills India Bhavanagar, Siddhapura's Modern Drills, Tapping Machines Supplier, All Geared Radial Drilling Machines, Fine Feed Drills, Auto Feed Drills

Radial type drill

Salient Features of the machine are as under:

  • Heavy Duty –40mm drilling in steel.
  • 8 Spindle speeds and 2 auto feeds for drilling, tapping, reaming operations.
  • This machine may be Capable of drilling, milling, tapping, honing, counter-boring, spot-facing, reaming, and boring and other similar utilities.
  • Speeds can easily change.
  • Thread tapping operations can be done in either rotation and working depth can be controlled using a positive stop gauge.
  • Double Column Construction for Rigidity and effortless centering.
  • Generously Proportional & Well adequately ribbed base plates, column and arm for Maximum Rigidity and Minimum deflection.
  • The high quality of this machine and its ease of operation make it suitable for use by students, amateurs’ and home hobbyists, as well as skilled technicians.
  • Tapper Roller facility for better sliding of drill head on arm guide
  • Hardened and ground gears for minimum wear and tear
  • All gears are made of alloy steel, nitride hardened & lapped running in oil bath fitted with splined shafts.

  • Precision hardened and ground spindle.
  • Machine tested as per IS: 2199-1982 Standards
  • A CAPACITY 40mm
    B Drilling Capacity In Solid  
    1 In Steel Having 600 Mpa Tensile Strength 40 MM
    2 In Cast Iron Having 180 Bhn 50 MM
    C Tapping Capacity  
    1 Metric Thread Up To Size [MM] 1-3/16 Fine Pitch
    2 Any Other Threads [Inches] 90 MM
    D Boring In Steel  
    E Dreel In Head

     

    1 Taper In Spindle [Nose] MT - 4
    2 Spindle Travels - Auto / Manual 200MM
    3 Spindle Diameter at Front Bearing 55MM
    4 Ram Diameter 78MM
    5 No Of Spindle Speed / Range 8/60 - 1760 RPM
    6 No. Of Auto feeds 2/0.6 -0.15
    F Rapid Feeds  
    1 Travel Of Rail [Verticle] 750MM
    2 Travel Of Drilling Head [Horizontal] 500 Manual
    G Electrical 
    1 Power Supply 415v,3ph, 50hz
    2 Drilling Head Two Speed Motor 2HP, 1440/2800 RPM
    3 Arm Eleveting Motor 0.5HP, 1440 RPM
    4 Coolant Pump  
    H Working Range  
    1 Drilling Radius Max 1035
    2 Distance Between Base Plate To Spindle Min/Max [Spindle Retracted] 240/1000

    3

    Distance From Column Face To Spindle Min / Max 450/950
    4 Drilling Head Traverse Max [Manual] 500
    5 Column Sleeve Diameter 200
    6 Vertical Travaers Of Arm [Auto] 750
    7 Rotation Of Arm [Both Side] 0-180 Deg.
    8 Height Of 1950 MM
    I Base Plate  
    1 Working Surface [L x W] 800 x 660
    2 Over All Size 1300x800x170
    3 No. Of T - Slots & Nominal Size 4/16
    4 Weight of machine with electricals & Standard Accesories [Approx] 900KG
    J Space Required By Machine 1300x26000x1900
    K Box Table Size 390x300x300
    L Colours MMT Green (Special)