Radial Drill Manufacturer, Pillar Drill Exporter, Industrial Drills India Bhavanagar, Siddhapura's Modern Drills, Tapping Machines Supplier, All Geared Radial Drilling Machines, Fine Feed Drills, Auto Feed Drills

Radial type drill

Salient Features of the machine are as under:

  • Heavy Duty –53mm drilling in steel.
  • 8 Spindle speeds and 4 auto feeds for drilling, tapping, reaming operations.
  • This machine may be Capable of drilling, milling, tapping, honing, counter-boring, spot-facing, reaming, and boring and other similar utilities.
  • Speeds can easily change.
  • Thread tapping operations can be done in either rotation and working depth can be controlled using a positive stop gauge.
  • Double Column Construction for Rigidity and effortless centering.
  • Generously Proportional & Well adequately ribbed base plates, column and arm for Maximum Rigidity and Minimum deflection.
  • The high quality of this machine and its ease of operation make it suitable for use by students, amateurs’ and home hobbyists, as well as skilled technicians.
  • Tapper Roller facility for better sliding of drill head on arm guide
  • Hardened and ground gears for minimum wear and tear
  • All gears are made of alloy steel, nitride hardened & lapped running in oil bath fitted with splined shafts.
  • Precision hardened and ground spindle.
  • Arm guide Surfaces are Precision ground.
  • Machine tested as per IS: 2199-1982 Standards
  • A CAPACITY 50mm
    B Drilling Capacity In Solid  
    1 In Steel Having 600 Mpa Tensile Strength 50 MM
    2 In Cast Iron Having 180 Bhn 60 MM
    C Tapping Capacity  
    1 Metric Thread Up To Size [MM] 48 x 3
    2 Any Other Threads [Inches] 1 ¾ Pitch
    D Boring In Steel 120mm
    E Dreel In Head


    1 Taper In Spindle [Nose] MT -5
    2 Spindle Travels - Auto / Manual 325 MM
    3 Spindle Diameter at Front Bearing 78 MM
    4 Ram Diameter 110 MM
    5 No Of Spindle Speed / Range 8/35 - 1230 RPM
    6 No. Of Auto feeds 4/0.10 -0.25
    F Rapid Feeds  
    1 Travel Of Rail [Verticle] 725
    2 Travel Of Drilling Head [Horizontal] 795 Manual
    G Electrical 
    1 Power Supply 415V, 3ph, 50HZ
    2 Drilling Head Two Speed Motor 5 HP
    3 Arm Eleveting Motor 2 HP
    4 Coolant Pump  
    H Working Range  
    1 Drilling Radius Min/Max 505/1300
    2 Distance Between Base Plate To Spindle Min/Max [Spindle Retracted] 505 / 1300


    Distance From Column Face To Spindle Min / Max 395 / 1420
    4 Drilling Head Traverse Max [Manual] 700 MM
    5 Column Sleeve Diameter 300MM
    6 Vertical Travaers Of Arm [Auto] 725MM
    7 Rotation Of Arm [Both Side] 0-180 Deg
    8 Height Of 3100 MM
    I Base Plate  
    1 Working Surface [L x W] 1300 x 800
    2 Over All Size 2000 x 970 x 200
    3 No. Of T - Slots & Nominal Size 4 / 22
    4 Weight of machine with electricals & Standard Accesories [Approx] 3000 KG
    J Space Required By Machine 2300 x 1000 x 2750
    K Box Table Size 500 x 600 x 500
    L Colours MMT Green