Date:14/12/2017
Radial Drill Manufacturer, Pillar Drill Exporter, Industrial Drills India Bhavanagar, Siddhapura's Modern Drills, Tapping Machines Supplier, All Geared Radial Drilling Machines, Fine Feed Drills, Auto Feed Drills

pillar type drill

Salient Features of the machine are as under:

  • Heavy Duty –38mm drilling in steel.
  • 8 Spindle speeds and 2 auto feeds for drilling, tapping, reaming operations.
  • This machine may be Capable of drilling, milling, tapping, honing, counter-boring, spot-facing, reaming, and boring and other similar utilities.
  • Speeds can easily change.
  • Thread tapping operations can be done in either rotation and working depth can be controlled using a positive stop gauge.
  • Single Column Construction for Rigidity and effortless centering.
  • Generously Proportional & Well adequately ribbed base plates, column and arm for Maximum Rigidity and Minimum deflection.
  • The high quality of this machine and its ease of operation make it suitable for use by students, amateurs’ and home hobbyists, as well as skilled technicians.
  • Tapper Roller facility for better sliding of drill head on arm guide
  • Hardened and ground gears for minimum wear and tear
  • All gears are made of alloy steel, nitride hardened & lapped running in oil bath fitted with splined shafts.
  • Precision hardened and ground spindle.
  • Machine tested as per IS: 2199-1982 Standards
  • A Capacity 38mm
    BDrilling Capacity in Solid
    1 IN STEEL HAVING 600 Mpa TENSILE STRENGTH38mm
    2 IN CAST IRON HAVING 180BHN 40mm
    C TAPPING CAPACITY
    1 METRIC THREADS UP TO SIZE [MM]
    2 ANY OTHER THREADS [INCH] Fine Pich
    D BORING IN STEEL 80mm
    E DRILL ING HEAD
    1 TAPER IN SPINDLE [NOSE] Mt - 4
    2 SPINDLE TRAVELS AUTO/MANUAL 200 mm
    3 SPINDLE DIAMETER AT FRONT BEARING 55mm
    4 RAM DIAMETER 78mm
    5 NO. OF SPINDLE SPEEDS / RANGE8/60 – 1760 RPM
    6 NO. OF AUTO FEEDS 2/0.1 – 0.2
    F RAPID FEEDS
    1 TRAVEL OF RAIL [ VERTICAL]750MM
    2 TRAVEL OF DRILLING HEAD [HORIZONTAL]500
    MANUAL
    G ELECTRICAL
    1 POWER SUPPLY 415V, 3PH, 50Hz
    2 DRILLING HEAD TWO SPEED MOTOR2HP, 1440/2800
    3 ARM ELEVATING MOTOR 0.5HP, 1440 RPM
    4 COOLANT PUMP
    H WORKING RANGE
    1 DRILLING RADIUS MAX.1035
    2

    DISTANCE BETWEEN BASE PLATE
    TO SPINDLE MIN/MAX. [SPINDLE RETRACTED]

    240 / 1000 B & A
    3DISTANCE FROM
    COLUMN FACE TO SPINDLE MIN \MAX
    450 / 950 D & C
    4 DRILLING HEAD TRAVERSE MAX [MANUAL] 500mm
    5 COLUMN SLEEVE DIAMETER 180 mm E
    6 VERTICAL TRAVERSE OF ARM [AUTO] 750 mm
    7 ROTATION OF ARM [BOTH SIDE]0-180 DEG.
    8 HEIGHT OF1900MM G
    I BASE PLATE
    1 WORKING SURFACE [L x W]800 x 660
    2 OVERALL SIZE1300 x 800 x 170 R x S x Q
    3 NO. OF T SLOTS & NOMINAL SIZE4/16
    4 WEIGHT OF MACHINE WITH ELELECTRICALS & STANDARD ACCESSORIES [APPROX] NET / CROSS800KG
    J SPACE REQUIRED BY 1300 x 26000
    MACHINE [L x W x H] MM
    BOX TABLE SIZE390 x 300 x 300